Among the questions of our followers How to Paste the Falling Kitchen Countertop Sink? We wanted to answer the question in detail today. It is a problem that can happen to old kitchen owners. So why should the kitchen sink sink fall, let’s start with this first. It is a problem that can be seen frequently in kitchens that are not maintained and not renewed for many years. Adhesive may also lose its effect due to the leakage of water between small cracks. You may experience falling problems not only on old machines but also on your new machines. In general, this is because it is not glued well.
In general, kitchen sinks with bottom gluing in old-style kitchens are glued with an adhesive called akemi. . Akemi marble adhesive loses its effect over time for some reasons and over time it loses its strength due to the weight of the kitchen sink. Akemi marble adhesive is used to fix both marbles and natural stones instantaneously, but as we mentioned, it is not a suitable adhesive for a long-term use. Today, it is not used for mounting kitchen countertops.
How to Paste the Falling Kitchen Countertop Sink?
Falling Sink of Kitchen Countertop To paste it, you can firstly apply the steps described below. It can be sandpaper or a wire, clean the falling kitchen sink and under the countertop (the parts of the sink where it joins) by fine sanding. Thus, you will completely remove old adhesive residues. In no way should you make sure that there are no traces and residue from the old adhesive, and also make sure that the sink and countertop area to be glued are wet. Dry wet floors by blowing hot air with a dry cloth or blow dryer. You should follow the same procedures for both marble counters and granite counters. While doing all these operations, we recommend that you place the bench upside down on a flat surface instead of leaning on it. In this way, you eliminate the possibility of falling and also it becomes very easy to clean and dry. Again, you can lay newspaper paper underneath it before placing the countertop on the flat surface. Newspaper papers both prevent the floor from being scratched and if your countertop is wet, it will help absorb water and allow it to dry quickly.
You may be interested in: How are Internal Doors Painted?
You can easily find many effective silicone adhesives on the market. Place the purchased silicone in the silicone gun and tighten it into straight strips without leaving any gaps on the edges of the falling sink that should stick. We also recommend using hot silicone, not cold, while doing this. First apply the silicone to the back and place the countertop before it dries. Then lift the front part of the bench and quickly squeeze the silicone and leave it on the bench. After this process, fix it to dry. You stick with marble silicone counter the sink should be fixed with wood for at least 4-5 hours. At this stage, 5 hours is enough time for the silicone to dry, but even if you are sure that our advice is dry, you should not use the counter for at least one day.
You may be interested in: How are interior doors painted?
For Bonding Cracked Marble Countertops
Sink To Marble
With the purchase of the sink, it is possible to utilize sinks that are rectangular or round to match its structure, regardless of color or pattern. Each marble countertop that draws great attention with its design contains different materials that can be used for gluing the sink. After the sink is glued, the material overflowing from the side sections must be cleaned.
Würth and Granite natural stone adhesives are the most popular products in this field and produced in a way to ensure that the sink is adhered in a very short time. Within 2 to 3 hours on average, it is ensured that all four sides of the sink can be glued through granite natural sink bonding models.
You may be interested in: How are interior doors painted? Tips You can find information about the intricacies of painting, how to paint interior doors and how to paint interior doors in our article.